Filter brands
Brands
Showing all 21 products
0 products shortlisted
Bissell Heavy Traffic
Bissell Stain Pretreat
Britex Spot 'n' Stain
Britex Spot 'n' Stain Carpet & Upholstery Wipes
Cavalier Bremworth Carpet Stain Remover For Dry Stains
Dr Beckmann Carpet Stain Remover
Glitz Carpet Cleaner
Home Recipe One
Home Recipe Two
Hoover Max Strength Deep Stain Remover
Hoover Oxy Tough Stain Remover
Long Life All in 1 Carpet & Spot
No Vac Instant Spot And Stain Remover
OzKleen Carpet Power
Peerless Jal Carpet Spotter And Deodoriser
Simple Green Carpet Cleaner
Vanish Gold Preen 3 in 1 Deep Cleaning Foam
Vanish Gold Preen Oxi Action Carpet Stain Removal Spray
Vanish Gold Preen Oxi Action Large Area Carpet Cleaner Powder
Water Only
Woolworths Strike Carpet Cleaner Foam
Cost
Price
$12.98
$25.95
$9.9
$7
$9.29
$7.2
$7.29
$0.55
$0.12
$24.99
$24.99
$9.98
$8
$5.4
$14.99
$8.49
$11.5
$11.5
$16
0
$4.5
Cost per 100mL
$2.08
$3.99
$1.98
$0.35
$2.65
$1.11
$0.97
$0.55
$0.4
$5.68
$3.84
$1.33
$2.76
$1.08
$2
$1.13
$1.92
$2.8
$3.14
0
$0.9
Type
Type
Foam spray
Spray
Spray
Wipes
Foam spray
Applicator brush
Spray
Spray
Spray
Aerosol
Spray
Spray
Spray
Spray with applicator brush
Spray
Spray
Foam spray
Spray
Powder
N/A
Foam spray
Recommended products
Recommended
Recommended
Recommended
Recommended
Test results
CHOICE Expert Rating
Red wine removal score
Oil/dirt removal score
Sauce removal score
Coffee removal score
Foundation removal score
Test method
1
1
1
N/A
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
1
Sustainability
Country of origin
USA
USA
Australia
China
New Zealand
Germany
China
N/A
N/A
USA
USA
Australia
Australia
Australia
Australia
New Zealand
UK
Poland
Poland
N/A
Australia
Antibacterial claim
N/A
N/A
N/A
Safe for septic or grey water systems claim
N/A
N/A
N/A
Biodegradable formula claim
N/A
N/A
N/A
Phosphate free claim
N/A
N/A
N/A
Specifications
Bottle size (mL/g)
623
650
500
20
350
650
750
100
30
440
650
750
290
500
750
750
600
410
510
N/A
500
Stain type
Embedded stain use only
Spot and stain removal
Spot and stain removal
Spot and stain removal
Spot treatment for dry stains
Spot stains
Spots, stains and complete carpet cleaning
Spot and stain removal
Spot and stain removal
Spot stains
Spot and stain removal
Spots, stains and complete carpet cleaning
Spot and stain removal
Stain and odour removal
Spot and stain removal and carpet deodoriser
Spot stains and deep cleans
General carpet cleaning
Spot and stain removal
General carpet cleaning
N/A
General carpet cleaning
Ingredients
Not stated
More than 30% water. Less than 3%: nonionic surfactants, detergent builders, anionic surfactant, sodium polyacrylate, fragrance, methylisothiazolone and benzisothiazolone
Not stated
Not stated
Dichloromethane 40-60%, cyclohexane 1-10%
Less than 5% anionic surfactants, non-ionic surfactants, oxygen-based bleaching agents, sodium benzoate, perfumes
Not stated
2 tablespoons dishwashing liquid, 3 tablespoons white vinegar, 1/4 cup water
1 teaspoon dishwashing liquid, 1 tablespoon white vinegar, 1 cup warm water, 1 teaspoon baking soda
Butoxydiglycol, proplylene glycol propyl ether, butane, propane, sodium borate, linalol, jasmin aldehyde, benzyl salicylate, hexyl cinnamic aldehyde, hydroxy-methylpentylcyclohexenecarboxaldehyde, coumarin
Hydrogen peroxide and linalol
Not stated
Not stated
Not stated
10-30% ethylene glycol mono butylether, 1-10% hydrogen peroxide (H202)
Not stated
Propellant: Hydrocarbon
Hydrogen peroxide
Not stated
Water
Not stated
Patch test required
Not specified
N/A
Method of application
Vacuum thoroughly prior to use. Perform patch test. Shake can well before use. Hold can upside down two feet from area. Depress button completely to spray an even layer (avoid streaming product). With a damp sponge or mop, spread foam into area. Continue to work into area until clean. For best cleaning results, spread foam in multiple directions. Let dry, then vacuum. For heavily soiled areas, repeat application may be necessary.
Before you clean, blot up wet stains with a clean cloth. Test a small hidden area for colourfastness and examine when dry. Turn nozzle to spray position and generously spray evenly over soiled area. Turn nozzle to stream position for heavier soils. Wait 3-5 minutes. Gently blot area with clean, damp, colour-safe cloth. Rinse cloth and repeat as needed. Allow carpet to dry thoroughly.
Test for colourfastness in an inconspicuous area. Not recommended for use on non-colourfast materials. Shake bottle well. Remove any solids or excess liquids. Generously spray area. Lightly agitate stained area working from edges towards centre. Blot with a paper towel pressing deep into stain. Difficult stains may require a second application. Rinse with water and blot to dry.
Test on an inconspicuous area to ensure colourfastness before using. Remove any solids from stained area and blot excess liquids with a dry paper towel. Apply wipe to the stain, blotting gently, starting from the outside and working in towards the centre. Repeat as necessary. Allow to dry.
Solid: Scoop up excess. Liquid: Blot, dilute with cold water and re-blot thoroughly and repeat as necessary. Test on hidden piece of carpet. Ensure stain is dry - do not use on wet stains. Adequately ventilate. Shake can well. Hold can upside down, 15cm above stain. Spray stain lightly - do not oversaturate. When sprayed area dries and turns white, vacuum entire area in both directions using narrow nozzle. Repeat after 24 hours for stubborn stains.
First time use: Twist off the brush head, do not remove seal, pierce a small hole in the seal about 2mm in diameter. Screw the brush head on again, taking care not to over tighten. Remove loose dirt, blot up spills from stained area and squeeze bottle gently to moisten applicator brush. Apply by holding the bottle so the applicator is flat against the soiled area - do not soak, let the formulation do the work. Leave for 3 minutes and then with a damp white cloth, gently remove all residues of the stain and solution. Heavy soiling may need second application. Rinse applicator after every use.
Test a hidden area for colour fastness. For spots and stains: Blot stain to remove excess. Spray over stain and allow to work for 5 minutes. Blot or gently rub any excess moisture from the carpet. Heavy stains may require second application. For complete carpet cleaning: Spray lightly and evenly over carpet area. Wipe lightly with cleaning cloth or sponge. Rinse cloth in cold clean water and repeat until carpet area is covered.
First, mop up the excess moisture as quickly as you can. The quicker you can attend to a mess, the better chance you have of getting it out! If you have some soda water on hand, dampen a cloth well and apply to the stain and sponge it up. If it is still there, make up the following mixture: 2 tablespoons dishwashing liquid, 3 tablespoons white vinegar, 1/4 cup water. Work the liquid into the stain and blot it dry with a clean towel. Read more at Stay At Home Mum.
Gather the ingredients to make your carpet cleaner. Along with being an amazing concoction, vinegar and baking soda put on quite a show when mixed. Vinegar is an acid, and baking soda is a base, so when the two mix together, they create carbon dioxide, which results in lots and lots of cleaning bubbles. Add the dishwashing liquid to the spray bottle along with vinegar, and then top with the warm water. Working over a sink, with the top of the spray bottle close at hand, add the baking soda, and then quickly screw on the top of the spray bottle. Vacuum over the area and then wipe gently with the abrasive side of a sponge. Spray the soiled area generously with the carpet cleaner, and then gently rub and dab with the towel. You should start to see cleaning results right away. Continue dabbing and wiping with the towel to absorb the water and completely remove the stain.
For best results, treat spot before it dries. Shake can and spray directly on the stain. Let stand for 60 seconds. Blot with white cloth or paper towel. Repeat until stain is removed. After stain is removed, clean area with water and dry by blotting. When completely dry, vacuum the area.
Turn nozzle to the desired setting and apply to the stained area. Wait 10 minutes. For spot and stain cleaning, gently blot with a damp colour-safe cloth. Rinse cloth and repeat as needed. Vacuum when dry.
For spots and stains: Spray liberally over affected area and leave for several minutes. Using a light blotting action, with a damp clean white cloth or sponge, work from the outside of the stain towards the centre. Rinse cloth in cold clean water and repeat until stain is removed. For complete carpet cleaning: Spray lightly and evenly over carpet area. Wipe lightly with damp clean white cloth or sponge. Rinse cloth in clean cold water and repeat until carpet area is covered. Test for colour fastness prior to usage.
Remove solid residue. Blot excess moisture. Shake can well. Spray soiled area avoiding saturation. Leave for 5 minutes. Blot gently with clean damp colourfast cloth or sponge. Rinse cloth or sponge. Repeat until stain removed. Gently rub treated area with a clean damp colourfast cloth or sponge to remove product residue and blot dry.
Always spot test on an inconspicuous area for colour fastness. Spray directly onto stain. Gently work from outer stain to centre with a clean, damp cloth or sponge. Leave for up to 5 minutes. Thoroughly rinse excess product from the stain area by gently pressing with a damp cloth with the aid of small amounts of water. Vacuum if needed. Heavy stains and thick pile carpet may need a second application.
Carpet deodoriser: Spray a fine mist over the carpet and allow to dry. Spray directly onto the odour-causing area to kill bacteria. A regular spray into the corners of a room will provide adequate odour control for extended periods. Carpet spotter: Spray the soiled area, taking care not to overwet the carpet. Allow 2 minutes of contact time. Blot with a clean, colourfast, absorbent cloth, working from the edge of the stain to the centre. Repeat the process if necessary.
Always test first on hidden area of carpet or fabrics for colour fastness. Remove excess soils. Spray product to cover soiled area. Allow 2 minutes of contact. Wipe and blot up with clean, white towel, cloth or paper towel. Repeat if necessary. Allow cleaned areas to dry prior to resuming use or traffic.
Shake well and spray from 80cm. Work in foam with either a clean, colourfast broom/brush or a clean, damp mop/sponge. Leave for 2 hours or until dry and then vacuum.
Remove excess dirt and stain. Spray on stain and leave for maximum 5 minutes. Blot the stain and remove excess product using a clean cloth. Repeat as necessary until stain is removed. Ensure the surfaces are dry before stepping or sitting on them.
Vacuum clean the carpet. Shake the bag thoroughly to maximise product coverage. Turn the bag upside down and pull off both sealing strips from the bottom. Hold the bag by the handle and shake to distribute the powder evenly across the carpet. Work in the powder with a brush and allow it to completely dry (approximately 20 minutes). Completely vacuum up the dried powder.
N/A
For general carpet cleaning: Vacuum thoroughly to remove loose dirt. Shake can well. Hold can upside down 80cm from area. Press button completely down to spray an even, thin layer on the area to be cleaned. Using a soft, damp and clean cloth or sponge, gently spread foam into area using straight strokes in various directions (not in a circular motion). Continue to work into area until clean. Allow area to settle for 1-2 hours or until dry. For heavily soiled area, repeated application may be necessary. Vacuum thoroughly to remove dried foam and loosened dirt as necessary.
Time to wait
Not specified
3-5 minutes
Not specified
N/A
When dries and turns completely white
3 minutes
5 minutes
Not specified
Not specified
1 minute
10 minutes
Several minutes
5 minutes
5 minutes
2 minutes
2 minutes
2 hours (or until dry)
5 minutes
20 minutes
N/A
1-2 hours
Tested time
5 minutes
5 minutes
5 minutes
N/A
20 minutes
3 minutes
5 minutes
5 minutes
5 minutes
1 minute
10 minutes
5 minutes
5 minutes
5 minutes
2 minutes
2 minutes
120 minutes
5 minutes
20 minutes
5 minutes
120 minutes
Warnings
Do not use on velvet, silk, leather, vinyl or cotton. Use on fabrics coded W or WS. If coded X or S, do not use.
Nothing aside from safety warnings.
Nothing aside from safety warnings.
Nothing aside from safety warnings.
DANGER: Extremely flammable aerosol.
WARNING! Causes serious eye irritation.
Nothing aside from safety warnings.
N/A
N/A
WARNING: Flammable.
Nothing aside from safety warnings.
Nothing aside from safety warnings.
WARNING: Protect from sunlight and do not expose to temperatures exceeding 50°C. Do not pierce or burn, even after use. Extremely flammable.
WARNING: Do not use with or immediately after any chemical or bleach.
WARNING: Keep out of reach of children. Read carefully and follow all instructions. Wash hands, face and all exposed skin thoroughly after handling. Wear protective gloves and clothing and eye/face protection.
WARNING: May cause eye irritation.
Do not use on velvet materials, brocade, or those unsuitable for wet cleaning.
Do not use on "velvet" materials, brocade, or those unsuitable for wet cleaning. Not suitable for silk and oriental rugs.
Do not use with water filter type vacuum cleaners, water extraction or shampooer machines, or any other machine treatment involving water.
N/A
Do not use on velvet, silk, leather, brocade, vinyl, cotton or any material not suitable for wet cleaning.
Website
bissell.com.au
bissell.com.au
britex.com
britex.com
bremworth.com.au
dr-beckmann-me.com/en/home/
cleanwithglitz.com.au
stayathomemum.com.au/houseandhome/diy-cleaning-products/removing-carpet-stains/
popsugar.com.au/home/homemade-carpet-cleaner-37717560
hoover.com.au
hoover.com.au
addlifetoyourfloors.com.au
novac.com.au
ozkleen.com
peerlessjal.com.au
simplegreen.co.nz
vanishstains.com.au
vanishstains.com.au
vanishstains.com.au
N/A
woolworths.com.au